Bit Pattern
0100 10XX
XD6D5D4 D3D2D1D0
0100 11XX
XXXN4 N3N2N1N0
0101 0B2B1B0
0110 01B1B0
1000 0001
XXC5C4 C3C2C1C0
Command
Set Multiplex Ratio
(Duty Ratio)
Set N-line Inversion
Set LCD Bias
Set DC-DC Converter
Factor
Set Contrast Control
Register
Description
The second command specifies the number of lines,
excluding ICONS, to be displayed. With Icon is disabled
(POR), 16~64 mux could be selected. With Icon
enabled, the available multiplex ratios are 17~ 65mux.
D6 – D0
000000
Mux(icon disable) Mux(icon enable)
invalid
invalid
…
0001111
invalid
invalid
0010000
16
17
0010001
17
18
…
1000000
64
65
1000001
invalid
invalid
1000010
invalid
invalid
…
1111111
invalid
invalid
The second command sets the n-line inversion register
from 3 to 33 lines to reduce display crosstalk. Register
values from 00001b to 11111b are mapped to 3 lines to
33 lines respectively. Value 00000b disables the N-line
inversion, which is the POR value.
To avoid a fix polarity at some lines, it should be noted
that the total number of mux (including the icon line)
should NOT be a multiple of the lines of inversion (n).
N4 – N0
00000
n-line inversion
Exit n-line inversion
00001
3 lines
00010
4 lines
…
11101
31 lines
11110
32 lines
11111
33 lines
Sets the LCD bias from 1/4 ~ 1/9 according to B2B1B0:
000: 1/4 bias
001: 1/5 bias
010: 1/6 bias
011: 1/7 bias
100: 1/8 bias
101: 1/9 bias (POR)
110: 1/9 bias
111: 1/9 bias
Set the DC-DC multiplying factor from 2X to 5X
B1B0:
00: 3X (POR)
01: 4X
10: 5X
11: invalid
The second command sets one of the 64 contrast
levels. The darkness increase as the contrast level
increase.
19
SSD0858
Rev 1.0
11/2002
SOLOMON