EiceDRIVERTM SIL
1EDI2004AS
Specification
Table 54 Electrical Characteristics for Pins: AMCLP (cont’d)
Parameter
Symbol
Values
Unit Note or Test Condition
Min. Typ. Max.
Output Fall Time
tfallAMCLP -
100
200
ns VCC1=typ., VCC2=typ.,
VEE2=typ., CLOAD = 1.5nF,
90%-10% 1)
-
100
150
ns VCC1=typ., VCC2=typ.,
VEE2=typ., CLOAD = 1.5nF,
80%-20% 1)2)
-
100
150
ns VCC1=typ., VCC2=typ.,
VEE2=typ., CLOAD = 1nF,
90%-10% 1)2)
Delay from OSD event detection to tOSDAMCLPD -
AMCLP turn off activation
40
85
ns
Delay from Gate below
VGATE1Ldetection to turn on
activation
tAMCOFFDel -
80
140
ns
1) thermally limited (Need to be verified in application.)
2) Not subject to production test. This parameter is verified by design / characterization.
VCC1=typ., VCC2=typ.,
VEE2=typ., No load, OSD
rising edge at 90% of
VREG and AMCLP falling
edge at 90% of VREG2)
VCC1=typ., VCC2=typ.,
VEE2=typ., No load,
VGATE1L= 2.1V, falling
edge and AMCLP rising
edge 10% of VREG,
TJUNC=150°C 2)
Table 55 Electrical Characteristics for Pin: VREG
Parameter
Symbol
Values
Unit Note or Test Condition
Min. Typ. Max.
VREG output voltage range
VREG2
4.75
5
5.30 V
VREG output DC current
IREG2
-
-
525
µA
1) Not subject to production test. This parameter is verified by design / characterization.
Referenced to GND2,
CLOAD=1µF
1)
Data Sheet
129
Rev. 2.0
2019-01-16