HSP50215 Ver la hoja de datos (PDF) - Intersil

Número de pieza

componentes Descripción

Fabricante

HSP50215

Digital UpConverter

Intersil 

HSP50215

Absolute Maximum Ratings

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.0V

Input, Output or I/O Voltage . . . . . . . . . . . .GND -0.5V to VCC +0.5V

Typical De-rating Factor . . . . . . . . . . . . 2mA/MHz Increase in ICCOP

ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 2

Operating Conditions

Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.75V to +5.25V

Temperature Range

Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 70oC

Industrial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40oC to 85oC

Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to +0.8V

Input High Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to VCC

Input Rise and Fall Time . . . . . . . . . . . . . . . . . . . . . . . . . 1V/ns Max

Thermal Information

Thermal Resistance (Typical, Note 2)

θJA (oC/W)

MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Maximum Package Power Dissipation at 70oC

MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.22W

Maximum Package Power Dissipation at 85oC

MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.81W

Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC

Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . 150oC

Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC

(MQFP - Lead Tips Only)

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the

device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTE:

2. θJA is measured with the component mounted on an evaluation PC board in free air.

DC Electrical Specifications VCC = 5 ±5%, TA = 0oC to 70oC, Commercial; TA = -40oC to 85oC Industrial

PARAMETER

SYMBOL

TEST CONDITIONS

MIN

MAX

UNITS

Logical One Input Voltage

VIH

VCC = 5.25V

2.0

-

Logical Zero Input Voltage

VIL

VCC = 4.75V

-

0.8

Clock Input High

VIHC

VCC = 5.25V

3.0

-

Clock Input Low

VIHL

VCC = 4.75V

-

0.8

Output High Voltage

VOH

IOH = -400µA, VCC = 4.75V

2.6

-

Output Low Voltage

VOL

IOL = +2.0mA, VCC = 4.75V

-

0.4

Input Leakage Current

IL

VIN = VCC or GND, VCC = 5.25V

-10

+10

Output Leakage Current

IO

VIN = VCC or GND, VCC = 5.25V

-10

+10

Standby Power Supply Current

ICCSB

VCC = 5.25V, Outputs Not Loaded

-

500

Operating Power Supply Current

(Commercial)

ICCOP

f = 52MHz, VIN = VCC or GND,

VCC = 5.25V

-

156

Operating Power Supply Current (In-

dustrial)

ICCOP

f = 48MHz, VIN = VCC or GND,

VCC = 5.25V

-

144

Input Capacitance

CIN

Freq = 1MHz, VCC Open, All Measurements Are

-

10

Referenced To Device Ground

V

V

V

V

V

V

µA

µA

µA

mA

(Note 3)

mA

(Note 3)

pF

(Note 4)

Output Capacitance

COUT

-

12

pF

(Note 4)

NOTES:

3. Power Supply current is proportional to operation frequency. Typical rating for ICCOP is 2mA/MHz.

4. Capacitance TA = 25oC, controlled via design or process parameters and not directly tested. Characterized upon initial design and at major pro-

cess or design changes.

3-440

Share Link: