S3C2440X
2003.10.15
PRODUCT OVERVIEW
NOTE:
1. The @BUS REQ. shows the pin state at the external bus, which is used by the other bus master.
2. ' – ‘ mark indicates the unchanged pin state at Bus Request mode.
3. Hi-z or Pre means Hi-z or early state and it is determined by the setting of MISCCR register.
4. AI/AO means analog input/analog output.
5. P, I, and O mean power, input and output respectively.
6. The I/O state @nRESET shows the pin status in the @nRESET duration below.
nRESET
FCLK
4FCLK
@nRESET
Preliminary product information describes products that are in development,
for which full characterization data and associated errata are not yet available
Specifications and information herein are subject to change without notice.
1-19