EM78P142
8-Bit Microprocessor with OTP ROM
NOTE
The P55/OSCI/ADC6 pin cannot be applied to OSCI and ADC6 at the same time.
If P55/OSCI/ADC6 functions as OSCI oscillator input pin, then ADE6 bit for R8 must
be ”0” and ADIS2~0 do not select “ 110”. The P55/OSCI/ADC6 pin priority is as follows:
P55/OSCI/ADC6 Pin Priority
High
Medium
Low
OSCI
ADC6
P55
The P70/OSCO/ADC5 pin cannot be applied to OSCO and ADC5 at the same time.
If P70/OSCO/ADC5 acts as OSCO oscillator input pin, then ADE5 bit for R8 must be ”0”
and ADIS2~0 do not select “101”. The P70/OSCO/ADC5 pin priority is as follows:
P70/OSCO/ADC5 Pin Priority
High
Medium
Low
OSCO
ADC5
P70
The P67/IR OUT/ADC4 pin cannot be applied to IR OUT and ADC4 at the same time.
If P67/IR OUT/ADC4 functions as ADC4 analog input pin, then IROUTE bit for IOCA0
must be “0”..
If P67/IR OUT/ADC4 functions as IR OUT analog input pin, then ADE4 bit for R8 must
be ”0” and ADIS2~0 do not select “100”.
The P67/IR OUT/ADC4 pin priority is as follows:
P67/IR OUT/ADC4 Pin Priority
High
Medium
Low
ADC4
IR OUT
P67
Product Specification (V1.0) 01.25.2008
(This specification is subject to change without further notice)
• 11