CX11250 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

CX11250

SmartHSF™ Mobile Modem

Unspecified 

SmartHSF Mobile Modem Data Sheet

4.1.11 0x2E- Subsystem ID Register

Subsystem ID register is supported. Loaded from the serial EEPROM after PCIRST# is deasserted.

4.1.12 0x34 - Cap Ptr

Capabilities Pointer (CAP_PTR) at offset 0x34 containing hardcoded value 0x40.

4.1.13 0x3C - Interrupt Line Register

The Interrupt Line register is a read/write 8-bit register. POST software will write the value of this register as it initializes and

configures the system. The value in this register indicates which of the system interrupt controllers the device’s interrupt pin is

connected to.

4.1.14 0x3D - Interrupt Pin Register

The Interrupt Pin register tells which interrupt pin the device uses. The value of this register is 0x01, indicating that INTA# will

be used.

4.1.15 0x3E - Min Grant Register

The Min Grant register is used to specify the devices desired settings for Latency Timer values. The value specifies a period

of time in units of 0.25 microsecond. Min Grant is used for specifying the desired burst period assuming a 33 MHz clock. This

register is loaded from the serial EEPROM after PCIRST# is deasserted.

4.1.16 0x3F - Max Latency Register

The Max Latency register is used to specify the devices desired settings for Latency Timer values. The value specifies a

period of time in units of 0.25 microsecond. Min Latency specifies how often the device needs to gain access to the PCI Bus.

This register is loaded from the serial EEPROM after PCIRST# is deasserted.

4.1.17 0x40 - Capability Identifier

The Capability Identifier is set to 01h to indicate that the data structure currently being pointed to is the PCI Power

Management data structure.

4.1.18 0x41 - Next Item Pointer

The Next Item Pointer register describes the location of the next item in the function’s capability list. The value given is an

offset into the function’s PCI Configuration Space. The value of 00h indicates there are no additional items in the capabilities

list.

4-4

Conexant

100553B

Share Link: