MPC8544E(2009) Ver la hoja de datos (PDF) - Freescale Semiconductor

Número de pieza

componentes Descripción

Fabricante

MPC8544E
(Rev.:2009)

PowerQUICC™ III Integrated Processor Hardware Specifications

Freescale Semiconductor 

DDR and DDR2 SDRAM

Table 12 provides the recommended operating conditions for the DDR SDRAM component(s) when

GVDD(typ) = 2.5 V.

Table 12. DDR SDRAM DC Electrical Characteristics for GVDD(typ) = 2.5 V

Parameter/Condition

Symbol

Min

Max

Unit Notes

I/O supply voltage

GVDD

2.375

2.625

V

1

I/O reference voltage

MVREF

0.49 × GVDD

0.51 × GVDD

V

2

I/O termination voltage

VTT

MVREF – 0.04

MVREF + 0.04

V

3

Input high voltage

VIH

MVREF + 0.31

GVDD + 0.3

V

—

Input low voltage

VIL

–0.3

MVREF – 0.3

V

—

Output leakage current

IOZ

–50

50

μA

4

Output high current (VOUT = 1.8 V)

IOH

–16.2

—

mA

—

Output low current (VOUT = 0.42 V)

IOL

16.2

—

mA

—

Notes:

1. GVDD is expected to be within 50 mV of the DRAM GVDD at all times.

2. MVREF is expected to be equal to 0.5 × GVDD, and to track GVDD DC variations as measured at the receiver. Peak-to-peak

noise on MVREF may not exceed ±2% of the DC value.

3. VTT is not applied directly to the device. It is the supply to which far end signal termination is made and is expected to be

equal to MVREF. This rail should track variations in the DC level of MVREF.

4. Output leakage is measured with all outputs disabled, 0 V ≤ VOUT ≤ GVDD.

Table 13 provides the DDR I/O capacitance when GVDD(typ) = 2.5 V.

Table 13. DDR SDRAM Capacitance for GVDD(typ) = 2.5 V

Parameter/Condition

Symbol

Min

Max

Unit Notes

Input/output capacitance: DQ, DQS

CIO

6

8

pF

1

Delta input/output capacitance: DQ, DQS

CDIO

—

0.5

pF

1

Note:

1. This parameter is sampled. GVDD = 2.5 V ± 0.125 V, f = 1 MHz, TA = 25°C, VOUT = GVDD/2, VOUT (peak-to-peak) = 0.2 V.

Table 14 provides the current draw characteristics for MVREF.

Table 14. Current Draw Characteristics for MVREF

Parameter/Condition

Symbol

Min

Max

Current draw for MVREF

IMVREF

—

500

Note:

1. The voltage regulator for MVREF must be able to supply up to 500 μA current.

Unit Notes

μA

1

MPC8544E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 3

18

Freescale Semiconductor

Share Link: