HT6116-70 Ver la hoja de datos (PDF) - Holtek Semiconductor

Número de pieza

componentes Descripción

Fabricante

HT6116-70

CMOS 2K × 8-Bit SRAM

Holtek Semiconductor 

Write cycle 1 (1)

HT6116-70

Write cycle 2 (1, 6)

Notes:

(1) WE must be high during all address transitions.

(2) A write occurs during the overlap (tWP) of a low CS and a low WE.

(3) tWR is measured from the earlier of CS or WE going high to the end of the write cycle.

(4) During this period, I/O pins are in the output state, so the input signals of the opposite

phase to the outputs must not be applied.

(5) If the CS low transition occurs simultaneously with the WE low transitions or after

the WE transition, outputs remain in a high impedance state.

7

3rd July ’97

Share Link: