EL2021 Ver la hoja de datos (PDF) - Intersil

Número de pieza

componentes Descripción

Fabricante

EL2021

Monolithic Pin Driver

Intersil 

EL2021

are best connected to the area of ground inside the

package outline to reduce the circulating current path

length, if possible.

Using the EL2021 without External Transistors

By connecting both drive pins to the output pin, the EL2021

can be used as a stand-alone driver, not requiring the

external transistors. The EL2021 is good for more than

Typical Applications

50mA in this mode. The output impedance rises to 12Ω,

however, and the current sense and high-impedance mode

are not available. The ripple seen in slew edges using the

external transistors is largely absent from the stand-alone

waveshapes; and overshoot is markedly improved at

VSR > 1V, especially with large capacitive loads.

100V/µS HIGH-CURRENT PIN DRIVER

OUTPUTTING TTL LEVELS

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

8

Share Link: