28F016XS Ver la hoja de datos (PDF) - Intel
Número de pieza
componentes Descripción
Fabricante
28F016XS Datasheet PDF : 54 Pages
| |||
28F016XS FLASH MEMORY
E
5.0 ELECTRICAL SPECIFICATIONS
5.1 Absolute Maximum Ratings*
Temperature Under Bias.................... 0°C to +80°C
Storage Temperature....................–65°C to +125°C
VCC = 3.3V ± 5% Systems
Symbol
Parameter
NOTICE: This is a production datasheet. The
specifications are subject to change without notice. Verify
with your local Intel Sales office that you have the latest
datasheet before finalizing a design.
*WARNING: Stressing the device beyond the “Absolute
Maximum Ratings” may cause permanent damage.
These are stress ratings only. Operation beyond the
“Operating Conditions” is not recommended and
extended exposure beyond the "Operating Conditions"
may affect device reliability.
Notes Min Max Units Test Conditions
TA
Operating Temperature, Commercial
1
0 70 °C Ambient Temperature
VCC
VCC with Respect to GND
2 –0.2 7.0 V
VPP
VPP Supply Voltage with Respect to GND 2,3 –0.2 14.0 V
V
Voltage on any Pin (except VCC,VPP) with 2,5 –0.5 VCC V
Respect to GND
+ 0.5
I
Current into any Non-Supply Pin
5
± 30 mA
IOUT
Output Short Circuit Current
4
100 mA
VCC = 5.0V ± 5% Systems
Symbol
Parameter
Notes Min Max Units Test Conditions
TA
Operating Temperature, Commercial
1
0 70 °C Ambient Temperature
VCC
VCC with Respect to GND
2 –0.2 7.0 V
VPP
VPP Supply Voltage with Respect to GND 2,3 –0.2 14.0 V
V
Voltage on any Pin (except VCC,VPP) with 2,5 –2.0 7.0 V
Respect to GND
I
Current into any Non-Supply Pin
5
± 30 mA
IOUT
Output Short Circuit Current
4
100 mA
NOTES:
1. Operating temperature is for commercial product defined by this specification.
2. Minimum DC voltage is –0.5V on input/output pins. During transitions, this level may undershoot to–2.0V for periods
<20 ns. Maximum DC voltage on input/output pins is VCC +0.5V which may overshoot to VCC +2.0V for periods <20 ns.
3. Maximum DC voltage on VPP may overshoot to +14.0V for periods <20 ns.
4. Output shorted for no more than one second. No more than one output shorted at a time.
5. This specification also applies to pins marked “NC.”
24
Share Link: 