ORDERING INFORMATION
1750AR RISC Microprocessor
UT1750AR * * * *
Lead Finish:
(A) = Solder
(C) = Gold
(X) = Optional
Screening:
(P) = Prototype
(C) = Mil Temp
Package Type:
(G) = 144-pin CPGA
(W) = 132-pin QFP (Gold only)
Access Time:
(12) = 12MHz operating frequency
(16) = 16MHz operating frequency
UTMC Core Part Number
Notes:
1. Lead finish (A, C, or X) must be specified.
2. If an “X” is specified when ordering, part marking will match the lead finish and will be either “A” (solder) or “C” (gold).
3. Mil Temp range flow per UTMC’s manufacturing flows document. Devices are tested at -55C, room temp, and 125C. Radiation neith er tested nor
guaranteed.
4. Prototype flow per UTMC’s document manufacturing flows and are tested at 25C only. Lead finish is gold only. Radiation neither tested nor guarateed.
54