S9518 Ver la hoja de datos (PDF) - Summit Microelectronics

Número de pieza

componentes Descripción

Fabricante

S9518

Nonvolatile DACPOT electronic potentiometer with debounced push button interface

Summit Microelectronics 

S9518

PIN NAMES

PINOUT

Symbol

Description

UP#

DWN#

VH

GND

PB input, moves VOUT toward VH input

PB input, moves VOUT toward VL input

VREF high

Ground

VOUT

VL

STR#

VDD

Trimmed voltage output

VREF low

Store input, providing a control input

to initiate a store operation

Supply voltage (2.7V to 5.5V)

2017 Table01 5.0

Analog Section

The S9518 is an 8-bit, voltage output digital-to-analog

converter (DAC). The DAC consists of a resistor network

that converts 8-bit digital values into equivalent analog

output voltages in proportion to the applied reference

voltage.

Reference Inputs

The voltage differential between the VL and VH inputs sets

the full-scale output voltage range. VL must be equal to or

greater than ground (a positive voltage). VH must be

greater than VL and less than or equal to VDD. See

specifications for guaranteed operating limits.

Output Buffer Amplifier

The voltage output is from a precision unity-gain follower

that can slew up to 1V/µs.

Digital Interface

The interface provides simple pushbutton control of an

up/down counter that drives the DAC. The DAC output is

a ratiometric voltage output.

UP# is an active low pushbutton input. An internal pull-up

resistor, with nominal value of 50kΩ, eliminates an exter-

nal resistor. A 30ms debounce period is included in the

input timing to prevent multiple pulsing of the counter.

Either a switch closure to ground or a low logic level will,

after the debounce time, change the potentiometer tap

position. UP# moves the output voltage towards the VH

reference input.

If the UP# pushbutton is kept depressed the counter will

continue to increment at the rate of one count every

250ms for one second. After one second the counter

increments faster, one count every 50ms, until the

pushbutton is released. Changes to the DAC output using

the UP# input do not alter the data stored in EEPROM.

8-Pin PDIP

or 8-Pin SOIC

UP# 1

DWN# 2

VH 3

GND 4

8 VDD

7 STR#

6 VL

5 VOUT

2017 T PCon 5.0

DWN# is an active low pushbutton input that decrements

the counter and moves the potentiometer output voltage

towards the VL reference input. The DWN# control input

also includes an internal 50kΩ pull-up resistor and a 30ms

debounce period to prevent multiple pulsing. A low logic

level will also change the potentiometer tap position after

the debounce period.

If the DWN# pushbutton is kept depressed the counter

continues to decrement at the rate of one count every

250ms for one second. After one second the counter

decrements at one count every 50ms until the pushbutton

is released. Changes to the DAC output using the DWN#

input do not alter the data stored in EEPROM.

STR# This input can be used in two ways:

1) If the input is tied low, then AUTOSTORE is enabled.

When VDD powers down, an automatic store cycle

takes place that updates the nonvolatile EEPROM

memory.

2) STR# is an active low pushbutton input that also

updates the nonvolatile memory. The input is

debounced but does not have an internal pull-up

resistor. For every valid push the S9518 will store the

current potentiometer position to EEPROM.

2

2017 5.2 8/2/00

SUMMIT MICROELECTRONICS, Inc.

Share Link: