DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

1EDI2004AS Ver la hoja de datos (PDF) - Infineon Technologies

Número de pieza
componentes Descripción
Fabricante
1EDI2004AS Datasheet PDF : 138 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
EiceDRIVERTM SIL
High Voltage IGBT Driver for Automotive Applications
1EDI2004AS
Single Channel Isolated Driver for Inverter Systems
AA Step
1
Overview
Quality Requirement Category: Automotive
The 1EDI2004AS is a high-voltage IGBT gate driver designed for automotive
motor drives above 5 kW. The 1EDI2004AS is based on Infineon’s Coreless
Transformer (CLT) technology, providing galvanic insulation between low
voltage and high voltage domains. The device has been designed to support
400 V, 600 V and 1200 V IGBT technologies.
The 1EDI2004AS can be connected on the low voltage side (“primary” side) to 5 V logic. A standard SPI
interface allows the logic to configure and to control the advanced functions implemented in the driver.
On the high voltage side (“secondary” side), the 1EDI2004AS is dimensioned to drive an external booster stage
or directly small IGBTs. Short propagation delays and controlled internal tolerances lead to minimal
distortion of the PWM signal.
A large panel of safety-related functions has been implemented in the 1EDI2004AS, in order to support
functional safety requirements at system level (as per ISO 26262). Besides, those integrated features ease the
implementation of Active Short Circuit (ASC) strategies.
The 1EDI2004AS can be used optimally with Infineon’s 1EBN100XAE “EiceDRIVER™ Boost” booster stage
family.
Features
The following features are supported by the 1EDI2004AS:
• Single Channel IGBT Driver.
• On-chip galvanic insulation (up to 6kV).
• Support of 600 V and 1200 V IGBT technologies.
• Low propagation delay and minimal PWM distortion.
• Support of 5 V logic levels (primary side).
• 16-bit Standard SPI interface (up to 2 MBaud) with daisy chain support (primary side).
• Enable input pin (primary side).
• Pseudo-differential inputs for critical signals (primary side).
• Power-On Reset pin (primary side).
• Debug mode.
Data Sheet
1
www.infineon.com
Rev. 2.0
2019-01-16

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]