DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AT91RM9200(2003) Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza
componentes Descripción
Fabricante
AT91RM9200
(Rev.:2003)
Atmel
Atmel Corporation Atmel
AT91RM9200 Datasheet PDF : 650 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
AT91RM9200
• IEEE1149.1 JTAG Boundary Scan on all Digital Pins
Boot Program
• Default Boot Program stored in ROM-based products
• Downloads and runs an application from external storage media into internal SRAM
• Downloaded code size depends on embedded SRAM size
• Automatic detection of valid application
• Bootloader supporting a wide range of non-volatile memories
– SPI DataFlash® connected on SPI NPCS0
– Two-wire EEPROM
– 8-bit parallel memories on NCS0 if device integrates EBI
• Boot Uploader in case no valid program is detected in external NVM and supporting
several communication media
• Serial communication on a DBGU (XModem protocol)
• USB Device Port (DFU Protocol)
Embedded
Software Services
• Compliant with ATPCS
• Compliant with AINSI/ISO Standard C
• Compiled in ARM/Thumb Interworking
• ROM Entry Service
• Tempo, Xmodem and DataFlash services
• CRC and Sine tables
Reset Controller
• Two reset input lines (NRST and NTRST) providing, respectively:
• Initialization of the User Interface registers (defined in the user interface of each
peripheral) and:
– Sample the signals needed at bootup
– Compel the processor to fetch the next instruction at address zero.
• Initialization of the embedded ICE TAP controller.
Memory Controller
• Programmable Bus Arbiter handling four Masters
– Internal Bus is shared by ARM920T, PDC, USB Host Port and Ethernet MAC
Masters
– Each Master can be assigned a priority between 0 and 7
• Address Decoder provides selection for
– Eight external 256-Mbyte memory areas
– Four internal 1-Mbyte memory areas
– One 256-Mbyte embedded peripheral area
• Boot Mode Select Option
– Non-volatile Boot Memory can be internal or external
– Selection is made by BMS pin sampled at reset
• Abort Status Registers
– Source, Type and all parameters of the access leading to an abort are saved
• Misalignment Detector
– Alignment checking of all data accesses
5
1768B–ATARM–08/03

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]