Specifications
VV5430
2.2 Defect Specification
A Defect is an area of pixels that produces output significantly different from its surrounding pixels for the same illumination level.
The definition of a Defect Pixel varies according to testing conditions as follows:
Test
Exposure Illumination
Defective Pixel output definition
Black Image Test
Light Image Test
Minimum
Mid range
Black
66% Sat.
Differing more than ±8%. from modal value.
Differing more than ±4% from modal value.
The pixel area of the sensor is divided into the following areas to qualify the defect specification:
Area A
Area B
Where Area A is the inner 50% of the image area
The defect specification is then defined as follows:
Image
Area
Max. No. of
Defectes
Area A
0
Area B
4
1
Notes
This is the most critical image area
Unconnected single pixels
Of up to four connected pixels (2x2 max.)
CD5430F-A
6/33