VV5430 Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

VV5430

Monochrome Analog Output CMOS Image Sensors

STMicroelectronics 

Specifications

VV5430

2. Specifications

2.1 Device Specifications

1.0

0.8

0.6

0.4

0.2

0

Wavelength nm

Illumination Colour Temp.

Clock Frequency

Exposure

Gain

Auto. Gain Control (AGC)

Correction mode

3200o K

Std. CCIR

Maximum

x1

Off

Linear

Figure 1 : Spectral Response

The sensor is tested using the example support circuit illustrated later in this document. Standard imaging conditions used for

optical tests employ a tungsten halogen lamp to uniformly illuminate the sensor (to better than 0.5%), or to illuminate specific

areas. A neutral density filter is used to control the level of illumination where required.

Parameter

Supply Voltage

Voltage on other input pins

Ambient Operating Temperature

(contact STMicroelectronics for extended temp. ranges)

Storage Temperature

Maximum DC TTL output Current Magnitude

Value

-0.5 to +7.0 volts

-0.5 to VDD + 0.5 volts

0oC to 40oC

-30oC to 125oC

10mA (per o/p, one at a time, 1sec. duration)

Table 2 : Absolute Maximum Ratings

Note: Stresses exceeding the Absolute Maximum Ratings may induce failure. Exposure to absolute maximum ratings

for extended periods may reduce reliability. Functionality at or above these conditions is not implied.

Symbol

VDD

VIH

VIL

TA

Parameter

Operating supply voltage

Input Voltage Logic “1”

Input Voltage Logic “0”

Ambient Operating Temperature

Min.

4.75

2.4

-0.5

0

Typ.

5.0

Max.

5.25

VDD+0.5

0.8

40

Units Notes

Volts

Volts

Volts

oC

Still air

Table 3 : DC Operating Conditions

CD5430F-A

4/33

Share Link: