TSL2581CS Ver la hoja de datos (PDF) - austriamicrosystems AG

Número de pieza

componentes Descripción

Fabricante

TSL2581CS

LIGHT-TO-DIGITAL CONVERTER

austriamicrosystems AG 

TSL2581, TSL2583

LIGHT-TO-DIGITAL CONVERTER

PRINCIPLES OF OPERATION

TAOS134A − JULY 2012

Analog-to-Digital Converter

The TSL258x contains two integrating analog-to-digital converters (ADC) that integrate the currents from the

channel 0 and channel 1 photodiodes. Integration of both channels occurs simultaneously, and upon completion

of the conversion cycle the conversion result is transferred to the channel 0 and channel 1 data registers,

respectively. The transfers are double buffered to ensure that invalid data is not read during the transfer. After

the transfer, the device automatically begins the next integration cycle.

lid Digital Interface

Interface and control of the TSL258x is accomplished through a two-wire serial interface to a set of registers

that provide access to device control functions and output data. The serial interface is compatible with I2C bus

a Fast-Mode. The TSL258x offers three slave addresses that are selectable via an external pin (ADDR SEL). The

slave address options are shown in Table 1.

v Table 1. Slave Address Selection

ill ADDR SEL TERMINAL LEVEL

GND

t Float

G s VDD

SLAVE ADDRESS

0101001

0111001

1001001

Technicaaml scoAntent NOTE: A read/write bit should be appended to the slave address by the master device to properly communicate with the TSL258x device.

The LUMENOLOGY r Company

r

r

www.taosinc.com

Copyright E 2012, TAOS Inc.

7

Share Link: