LZ93N61 Ver la hoja de datos (PDF) - Sharp Electronics
Número de pieza
componentes Descripción
Fabricante
LZ93N61 Datasheet PDF : 12 Pages
| |||
U93N61
PU.or-N. 1 C--V-M--R--~-
15
SPI 1
16
SP12
17
FS
18
SI 1
19
S12
20 FCDS
21
c11
22
C12
23
RI j
24
R12
25 MCKI
26 MCK2
27 MCK3
28 MCK4
29
SE
30
Vcc
31
GND
I I/n
-$-
I M .-LA—R....~.
PIN NAME
IC
SPI and SP2 phase
m
control input 1
FUNCTON
The SPII pin sets the falling edge of COICS sampling
pulses SP1 (pin 13) and SP2 (pin 14).
Ic
SP1 and SPZ phase The SP12 pin sets the rising edge of color sampling
N
control input 2
pulses SPI (pin 13) and SP2 (pin 14).
o
n
CDS pulse 2
The FS pin outputs the pulses for sampling output
signals of CCD.
Ic
m
FS phase control input 1 The SII pin sets the phase of the FS (pin 17).
Ic
nn
FS phase control input 2 The SIZ pin sets the width of the FS (pin 17).
o
n
FCDS pulse 1
The FCDS pin outputs the pulse to clamp the out-
put signals of CCD.
Ic
FCDS phase control
m
input 1
The Cl 1 pin sets the phase of the FCDS (pin 20).
FCDS phase control
Ic
N
input 2
The CIZ pin sets the width of the FCDS (pin 20).
FR phase control
Ic
nn
input 1
The RI I pin sets the pahse of the FR (pin 42).
Ic
FR phase control
nn
input 2
The R12 pin sets the width of the FR (pin 42).
o
nn
Clock output 1
The MCKI pin outputs 1/2 dividing pulse of CKI (pin
46). It is the same phase with the FH i (pin 45).
o
nn
Clink output 2
The MCK2 pin outputs 1/2 dividi~ pulse of CKI (pin
46). It is delayad by approximately 90° in phase with
respect to FH1 (pin 45).
o
nrl
Clwk output 3
Tk MCK3 pin outputs 1/2 dividing pulse of CKI (pin
46). It is the same phase with the FHz (pin 44).
o
m
Clock output 4
The MCK4 pin outputs 1/2 dividing pulse of CKI (pin
46). It is delayed by approximately 90” in phase witi
respect to FH2 (pin 44).
The SE pin outputs the demodulation carrier of out-
put signals of CCD, and input the switching signal
Color demodulation
of color sampling pulses SP1 (pin 13) and SPZ (pin
o
rL
pulw
14). It outputs 1/4 dividing pulse of the CKI input
(pin 46), and selects the phase in mmbination with
the SESL (pin 32) and the SINV (pin 34).
–
—
Power supply
The Vcc is a + 5 V power supply pin.
–
–
Ground
The GND is a ground pin.
291
Share Link: 