SA6.5AHA0G Ver la hoja de datos (PDF) - TSC Corporation
Número de pieza
componentes Descripción
Fabricante
SA6.5AHA0G Datasheet PDF : 7 Pages
| |||
SA SERIES
Taiwan Semiconductor
CREAT BY ART
500W, 5V - 170V Transient Voltage Suppressor
FEATURES
- Excellent clamping capability
- Low dynamic impedance
- 500W surge capability at 10 / 1000 μs waveform
- Fast response time: Typically less than
1.0ps from 0 volt to VBR for unidirectional
and 5.0ns for bidirectional
- Typical IR less than 1μA above 10V
- Compliant to RoHS Directive 2011/65/EU and
in accordance to WEEE 2002/96/EC
- Halogen-free according to IEC 61249-2-21
MECHANICAL DATA
Case: DO-204AC (DO-15)
Molding compound: UL flammability classification rating 94V-0
Part no. with suffix "H" means AEC-Q101 qualified
Packing code with suffix "G" means green compound (halogen-free)
Terminal: Pure tin plated leads, solderable per JESD22-B102
Meet JESD 201 class 2 whisker test
Weight: 0.4g (approximately)
DO-204AC (DO-15)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Peak power dissipation at TA=25°C, Tp=1ms (Note 1)
PPK
500
W
Steady state power dissipation at TL=75°C
lead lengths .375", 9.5mm (Note 2)
PD
3
W
Peak forward surge current, 8.3 ms single half sine-wave
superimposed on rated load (Note 3)
IFSM
70
A
Maximum instantaneous forward voltage at 35 A for
Unidirectional only
VF
3.5
V
Operating junction temperature range
TJ
- 55 to +175
°C
Storage temperature range
TSTG
- 55 to +175
°C
Note 1: Non-repetitive current pulse per fig. 3 and derated above TA=25°C per fig. 2
Note 2: Mounted on 10 x 10 mm copper pads to each terminal
Note 3: 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
Devices for Bipolar Applications
1. For bidirectional use C or CA suffix for types SA5.0 - types SA170.
2. Electrical characteristics apply in both directions
Version: K1602
Share Link: 