MAAP-007649-0001A1 Ver la hoja de datos (PDF) - M/A-COM Technology Solutions, Inc.
Número de pieza
componentes Descripción
Fabricante
MAAP-007649-0001A1 Datasheet PDF : 7 Pages
| |||
MAAP-007649-000100
Ultra Linear 2W Power Amplifier
800 to 1000 MHz
Features
Product Image
• HIGH Gain: 19 dB (TYP.)
• HIGH P1dB: +34.0 dBm (TYP.)
• HIGH OIP3: +49.5 dBm (TYP.)
• 50% PAE @ P1dB
• Optimized Performance for RFID Bands
• >1 watt Dense Reader Mode Spectral Mask Compliance
• On-Chip Active Bias Network
• Lead Free 4 mm PQFN Surface Mount Package
• 260oC Reflow Capability
Functional Block Diagram
Rev. V3
Applications
• RFID Readers
• Cellular Infrastructure
• AMPS, ISM Applications
• Multi-Carrier Applications
Description
M/A-COM’s MAAP-007649-000100 2 watt power amplifier
utilizes GaAs HBT technology with a +20 Volt BVceo process for
improved linearity performance, power efficiency, and high
reliability, in a low cost 4 mm PQFN surface mount plastic
package.
The MAAP-007649-000100 incorporates an on-chip active bias
network for ease of implementation, and maintains high linearity
over temperature. The device operates from a single +7.5 volt
supply and has a +4.5 volt reference pin for power down
control capability.
The MAAP-007649-000100 has been optimized as a power
amplifier for RFID Reader applications, but can also be used for
infrastructure and industrial applications, since it provides
consistent performance over the entire 800 to 1000 MHz band.
Pin Configuration
Pin
No.
1
2
3
4
5
6
7
8
Function
Description
VB OUT
RF INPUT
RF INPUT
RF INPUT
No Connection or GND
No Connection or GND
No Connection or GND
Output for base bias to PA device from on-chip bias
circuit. See schematic.
RF Input Signal
RF Input Signal
RF Input Signal
No Connection. GND preferred
No Connection. GND preferred
No Connection. GND preferred
No Connection or GND No Connection. GND preferred
Ordering Information1
Part Number
Package
MAAP-007649-000100
4 mm 16 lead PQFN
MAAP-007649-0001A1 Sample Application Kit (860 to 930 MHz)
MAAP-007649-0001A2
Sample Application Kit (960 MHz)
9
RF Output / VCC RF Output & VCC Supply Input
10
RF Output / VCC RF Output & VCC Supply Input
11
RF Output / VCC RF Output & VCC Supply Input
12
RF Output / VCC RF Output & VCC Supply Input
13
VCCB
VCC supply to Bias Circuit
Control Input. Normally not connected.
14
VCONT B
May be used only when the external bias setting
resistor option is desired.
Control Input to PA when on-chip bias setting resistor
15
VCONT A
Is used. Recommended normal operation with
VCONT = +4.4 V.
16
N/C
No Connection. GND preferred
Pkg.
Base
RF/DC GND and thermal path to PCB vias.
GND
Sufficient vias must be provided for thermal
considerations. See PCB layout.
1. Reference Application Note M513 for reel size information.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 