5962F0252304QXX Ver la hoja de datos (PDF) - Aeroflex UTMC

Número de pieza

componentes Descripción

Fabricante

5962F0252304QXX

Microcontroller

Aeroflex UTMC 

Notes:

1. The Unimplemented Opcode and Software Trap interrupts are not prioritized. The Interrupt Controller immediately services these interrupts when they are

asserted. NMI has the highest priority of all prioritized interrupts. Any PTS interrupt has priority over lower priority interrupts, and over all other maskable

interrupts. The standard maskable interrupts are serviced according to their priority number with INT0 has the lowest priority of all interrupts.

2. These interrupts can be configured to function as independent, external interrupts.

3. If the Serial interrupt is masked and the Receive and Transmit interrupts are enabled, the RI flag and TI flag generate separate Receive and Transmit interrupts.

4. If the Receive and Transmit interrupts are masked and the Serial interrupt is enabled, both RI flag and TI flag generate a Serial Port interrupt.

5

Share Link: