ISL29000 Ver la hoja de datos (PDF) - Renesas Electronics
Número de pieza
componentes Descripción
Fabricante
ISL29000 Datasheet PDF : 7 Pages
| |||
ISL29000
Short Circuit Current Limit
The ISL29000 does not limit the output short circuit current.
If the output is directly shorted to the ground continuously,
the output current could easily increase for a strong input
light such that the device may be damaged. Maximum
reliability is maintained if the output continuous current never
exceeds 6mA by adding a load resistor at the output. This
limit is set by the design of the internal metal interconnects.
Suggested PCB Footprint
Footprint pads should be a nominal 1-to-1 correspondence
with package pads. The large, exposed central die-mounting
paddle in the center of the package requires neither thermal
nor electrical connections to PCB, and such connections
should be avoided.
Power Supply Bypassing and Printed Circuit
Board Layout
The ISL29000 is relatively insensitive to the printed circuit
board layout due to its low speed operation. Nevertheless,
good printed circuit board layout is necessary for optimum
performance. Ground plane construction is highly
recommended, lead length should be as short as possible
and the power supply pins must be well bypassed to reduce
the risk of oscillation. For normal single supply operation,
where the GND pin is connected to ground, a 0.1µF ceramic
capacitor should be placed from VCC pin to GND pin. A
4.7µF tantalum capacitor should then be connected in
parallel, placed close to the device.
© Copyright Intersil Americas LLC 2005-2008. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6117 Rev 6.00
September 2, 2008
Page 6 of 7
Share Link: 