CPC5601D Ver la hoja de datos (PDF) - IXYS CORPORATION

Número de pieza

componentes Descripción

Fabricante

CPC5601D

LITELINK™ Family Auxiliary Programmable Driver IC

IXYS CORPORATION 

INTEGRATED CIRCUITS DIVISION

Features

• Meets PC Card (PCMCIA) height requirements

• Zero standby current

• PCB real estate and cost savings

• Can be used with LITELINK II and LITELINK III parts

Compliance

• TIA/EIA/IS-968 (FCC part 68)

• UL1950

• UL60950

• EN/IEC 60950-1 compliant

• EN55022B

• CISPR22B

• EN55024

• TBR-21

Ordering Information

Part Number Description

CPC5601D

16-pin, 14-lead SOIC, 0.300” wide package,

50/Tube

CPC5601DTR

16-pin, 14-lead SOIC, 0.300” wide package,

1000/Reel

Figure 1. CPC5601 Block Diagram

RING 1

GND 2

INPUT 3

NC 6

Shift

Register

Drivers

16 LED-

15 LED+

14 VDDLINE

13

12

11

10

9

8

B1

B2

B3

B4

B5

B6

7 -BR

CPC5601 LITELINK™ Family

Auxiliary Programmable Driver IC

Description

The CPC5601 is a serially-programmed driver IC for

use with IXYS Integrated Circuits Division’s LITELINK

Silicon Data Access Arrangement (DAA) ICs. The

CPC5601 allows host-equipment control of DAA char-

acteristics for worldwide DAA implementations, avoid-

ing multiple implementations with discrete component

changes or “stuff” options. The small, low-profile pack-

age makes the CPC5601 ideal for 56K PC Card

(PCMCIA) modems, PC motherboards, and soft-

modems.

The CPC5601 uses opto-electronics to maintain the

isolation barrier required in the data access arrange-

ment for connection of host devices to the public

switched telephone network (PSTN).

The one-bit serial input of the CPC5601 recovers

clocking information from the input signal to set bits in

the shift register. The shift register outputs connect to

open-drain FET latches that are used to switch in dif-

ferent external components to set V/I slope, DC termi-

nation current limit, gain, and AC termination value in

LITELINK DAA implementations.The CPC5601 does

not need a clock signal for shift register operation, but

relies on internal timing instead.

The CPC5601 also includes an opto-coupler for ring

detection applications where the AC coupled ring

detector of the LITELINK DAA is not used.

Pb

e3

DS-CPC5601-R04

www.ixysic.com

1

Share Link: