AS7C164A Ver la hoja de datos (PDF) - Alliance Semiconductor

Número de pieza

componentes Descripción

Fabricante

AS7C164A

8K X 8 BIT HIGH SPEED CMOS SRAM

Alliance Semiconductor 

NOVEMBER 2009

AS7C164A

8K X 8 BIT HIGH SPEED CMOS SRAM

WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6)

Address

CE#

CE2

WE#

Dout

tWC

tAW

tCW

tAS

tWP

tWHZ

(4)

Din

tWR

TOW

High-Z

(4)

tDW

tDH

Data Valid

WRITE CYCLE 2 (CE# and CE2 Controlled) (1,2,5,6)

Address

CE#

CE2

tWC

tAW

tAS

tCW

WE#

Dout

tWP

tWHZ

(4)

Din

tWR

High-Z

tDW

tDH

Data Valid

Notes :

1.WE#, CE# must be high or CE2 must be low during all address transitions.

2.A write occurs during the overlap of a low CE#, high CE2, low WE#.

3.During a WE#controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be

placed on the bus.

4.During this period, I/O pins are in the output state, and input signals must not be applied.

5.If the CE#low transition and CE2 high transition occurs simultaneously with or after WE# low transition, the outputs remain in a high

impedance state.

6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state.

NOVEMBER/2009 V1.2

Alliance Memory Inc

Page 6 of 10

Share Link: