CDB4385A
JUMPER /
SWITCH
J15
J16
S2
PURPOSE
Selects source of control data
JTAG micro programming
Resets CS8416 and CS4385A
POSITION
*shunts on Left
shunts removed
-
CS4385A mode settings M0-4
1-5
Sets clock source
6
S1
Sets MCLK ratio of CS8416
7
Selects PCM or DSD mode
8
*Default Factory Settings
FUNCTION SELECTED
*Control from PC and on-board microcontroller
External control input using center and right columns
Reserved for factory use only
The CS8416 must be reset if switch S1 is changed
Default: M0, M4 open (HI)
M1, M2, M3 closed (LO)
Sets clock source for CS4385A
*open = RX(CS8416), closed = EXT(J11)
Selects 128x (open) or 256x (*closed) MCLK/LRCK ratio
output for CS8416
For PCM input set to *Open, for DSD set to Closed
Table 2. CDB4385A Jumper Settings
6
DS837DB1