DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

EM78860 Ver la hoja de datos (PDF) - ELAN Microelectronics

Número de pieza
componentes Descripción
Fabricante
EM78860
EMC
ELAN Microelectronics EMC
EM78860 Datasheet PDF : 25 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
EM78860
8-BIT MICRO-CONTROLLER
GENERAL DESCRIPTION
The EM78860 is an 8-bit RISC type microprocessor with low power , high speed CMOS technology .
Integrated onto a single chip are on_chip watchdog (WDT) , RAM , ROM , programmable real time clock /
counter , internal interrupt , power down mode , LCD driver and tri-state I/O . The EM78860 provides a single
chip solution to design a message display .
FEATURES
CPU
• Operating voltage range : 2.5V~5.5V
• 16Kx13 on chip ROM
• 2.8Kx8 on chip RAM
• Up to 32 bi-directional tri-state I/O ports
• 8 Level stack for subroutine nesting
• 8-bit real time clock/counter (TCC)
• Two sets of 8 bit counters can be interrupt sources
• Selective signal sources and with overflow interrupt
• Programmable free running on chip watchdog timer
• 99.9% single instruction cycle commands
• Four modes (internal clock 3.679MHz, external 32.768KHz)
1. Sleep mode : CPU and 3.679MHz clock turn off, 32.768KHz clock turn off
2. Idle mode : CPU and 3.679MHz clock turn off, 32.768KHz clock turn on
3. Green mode : 3.679MHz clock turn off, CPU and 32.768KHz clock turn on
4. Normal mode : 3.679MHz clock turn on , CPU and 32.768KHz clock turn on
• Low battery detector
• Input port wake up function
• 8 interrupt source , 4 external , 3 internal
100 pin QFP or chip
• Port key scan function
• Port interrupt , pull high and open drain functions
• Clock frequency 32.768KHz externally
LCD
• LCD operation voltage chosen by software
• Common driver pins : 16
• Segment driver pins : 60
• 1/4 bias
• 1/8,1/16 duty
APPLICATION
1. adjunct units
2. data bank
* This specification are subject to be changed without notice.
6.24.1998 1

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]