ICL8069 Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Fabricante
ICL8069 Datasheet PDF : 4 Pages
| |||
Low-Voltage Reference
ABSOLUTE MAXIMUM RATINGS
Reverse Voltage ..............................................................(Note 1)
Forward Current ..................................................................10mA
Reverse Current ..................................................................10mA
Power Dissipation.......Limited by Max Forward/Reverse Current
Storage Temperature Range .............................-65°C to +150°C
Operating Temperature Ranges
ICL8069C .............................................................0°C to +70°C
ICL8069E ..........................................................-40°C to +85°C
ICL8069M .......................................................-55°C to +125°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: In normal use, the reverse voltage cannot exceed the reference voltage. However, when plugging units into a powered-up
test fixture, an instantaneous voltage equal to the compliance of the test circuit will be seen. This should not exceed 20V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(TA = +25°C, unless otherwise noted.) (Note 2)
PARAMETER
Output Voltage
IR = 500µA
CONDITIONS
MIN TYP MAX UNITS
1.20 1.23 1.25
V
Output Voltage
Temperature Coefficient
IR = 500µA,
TA = operating
temperature range
(Note 3)
ICL8069A
ICL8069B
ICL8069C
ICL8069D
10
25
ppm/°C
50
100
Output Voltage Change
Reverse Dynamic Impedance
Forward Voltage Drop
50µA ≤ IR ≤ 5mA
IR = 50µA,
IR = 500µA
IF = 500µA
15
20
mV
1
2
Ω
0.6
2
0.7
1
V
RMS Noise Voltage
10Hz ≤ f ≤ 10kHz,
IR = 500µA
5
µV
Reverse Current Range
0.050
5
mA
Note 2: If circuit strays in excess of 200pF are anticipated, a 4.7µF shunt capacitor will ensure stability under all operating condi-
tions.
Note 3: For military devices, measurements are made at +25°C, -55°C, and +125°C, while for commercial devices measurements
are made at +25°C, 0°C, and +70°C. The units are then classified as a function of the worst-case TC. Sample tested to 0.1%
AQL.
2 _______________________________________________________________________________________
Share Link: 