SACB(500W) Series
LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
STAND-OFF VOLTAGE5.0 - 50 Volts
500 watt Peak Pulse Power
DO-214AA (SMB J-Bend)
FEATURES
Cathode Band
◎ For surface mounted applications in order to optimize board space
◎ Glass passivated junction
0.086 (2.20)
0.073 (1.85)
0.155 (3.94) ◎ 500W Peak Pulse Power capability with a 10/1000us waveform,repetition
0.130 (3.30)
rate (duty cycle): 0.01%
◎ Excellent clamping capability
0.180 (4.57)
0.160 (4.06)
◎ Low incremental surge resistance
◎ Fast response time: typically less than 1.0ps from 0 Volts to V(BR)
0.098 (2.5)
0.083 (2.1)
0.012 (0.305)
for unidirectional types
0.006 (0.152)
◎ Ideal for data line applications
◎ High temperature soldering guaranteed: 260°C/10 seconds,0.375"(9.5mm)
0.060 (1.52)
0.030 (0.76)
0.012 (0.3) MAX.
0.220 (5.59)
0.205 (5.21)
lead length,5lbs., (2.3kg) tension
Dimensions in inches and(millimeters)
Transient
Voltage
Suppressor
Diode
MECHANICAL DATA
Case:JEDEC DO-214AA. Molded plastic over glass passivated junction
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity:The band denotes TVS cathode
Standard Packaging:12mm tape(EIA STD RS-481)
Weight: 0.003ounce, 0.093gram
Schemati
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
RATING
SYMBOL VALUE
Peak Pulse Power Dissipation with a 10/1000µs waveform (Note 1)
PppM
Minimum
500
Steady State Power Dissipation at TL= 75°C with lead lengths or 0.375"
(9.5mm)
PM(AV)
3
Peak Pulse Power Surge Current with a 10/1000 µS waveform (Note
1.FIG.3)
IPPM
SEE
TABLE 1
Operating junction and Storage Temperature Range
TJ , TSTG
-55 to
+175
Note:
1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
UNITS
Watts
Watts
Amps
°C
REV.2014.05.01
02 | www.spsemi.cn