MC-7891 Ver la hoja de datos (PDF) - California Eastern Laboratories.

Número de pieza

componentes Descripción

Fabricante

MC-7891

1 GHz CATV 19 dB POWER DOUBLER AMPLIFIER

California Eastern Laboratories. 

MC-7891

NOTES ON CORRECT USE

(1) The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired stress

to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance.

Recommended that space is 2.0 to 3.0 mm typical.

(2) Recommended torque strength of the screw is 59 to 78 Ncm.

(3) Form the ground pattern as wide as possible to minimize ground impedance.

(to prevent undesired oscillation)

All the ground pins must be connected together with wide ground pattern to decrease impedance difference.

RECOMMENDED SOLDERING CONDITIONS

This product should be soldered and mounted under the following recommended conditions.

methods and conditions other than those recommended below, contact your nearby sales office.

For soldering

Soldering Method

Partial Heating

Soldering Conditions

Peak temperature (pin temperature) : 350°C or below Note

Soldering time (per pin of device) : 3 seconds or less

Recommended Condition Symbol

−

Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead.

4

Data Sheet PG10673EJ01V0DS

Share Link: