S13B Ver la hoja de datos (PDF) - Switchcraft, Inc.

Número de pieza

componentes Descripción

Fabricante

S13B

1/4" PHONE JACKS

Switchcraft, Inc. 

Insulated Mount: See drawing. S1028 flatwasher and

Part Number S1029 shoulder washer must be

ordered separately for mounting in .437 inch diameter hole.

NOTE: See Hi-D Jax® for jack specifically designed

for insulated mounting without additional washers.

PC Board Mounting: See Recommended PC Board Layout

drawing below for jacks with PC terminals. Recommended

PC board thickness is .062 inches.

Mounting Centers: 1.188 inch (30mm) recommended.

Centers may vary with jack selected, for example, Number

11 mounts on .813 inch (20.6mm) and 14B mounts on

1.125 inch (28.6mm) minimum centers.

PREFIX OPTIONS

Blank- 1/4" Commercial

C- Accepts Mill Plug

FA- .205" Faston Terminals

FAL- .205" Faston Terminals

and .375" Long Bushing

L- .375" Long Bushing

PC- PC Terminals

S- Accepts .206 Diameter Plugs

SERIES

Jack 1-Littel Jax®

CIRCUITRY

1- I

2A- III

2B- IV

3- V

3A- VI

3B- VII

3E- IX

4B- XII

TWO CONDUCTOR PART NUMBERS

Part Number

Description

Jack Schematic1

Typical Mating

Plug

Share Link: