FR101S(Old_V) Ver la hoja de datos (PDF) - TSC Corporation
Número de pieza
componentes Descripción
Fabricante
FR101S Datasheet PDF : 2 Pages
| |||
FR101S THRU FR107S
Features
1.0 AMP. Fast Recovery Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
A-405
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Axial leads, solderable per MIL-
STD-202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260℃/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
Weight: 0.22gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FR FR FR FR FR FR FR Units
101S 102S 103S 104S 105S 106S 107S
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
@TA = 55℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
VDC
I(AV)
IFSM
50 100 200 400 600 800 1000 V
1.0
A
30
A
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=100℃
IR
Maximum Reverse Recovery Time ( Note 1 ) Trr
1.2
V
5.0
uA
100
uA
150
250
500
nS
Typical Junction Capacitance ( Note 2 )
Cj
10
Typical Thermal Resistance ( Note 3 )
RθJA
90
Operating Temperature Range
TJ
-65 to +150
Storage Temperature Range
TSTG
-65 to +150
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
pF
OC/W
℃
℃
- 394 -
Share Link: 