ADNS-2030 Ver la hoja de datos (PDF) - Agilent Technologies, Inc

Número de pieza

componentes Descripción

Fabricante

ADNS-2030

Low Power Optical Mouse Sensor

Agilent Technologies, Inc 

Overview of Optical Mouse Sensor

Assembly

2D Assembly Drawing of ADNS-2030

Figures 3 and 4, shown with

HDNS-2100, HDNS-2200 and

HLMP-ED80-XXXXX.

1.27

0.050

39.39

1.551

30.32

1.194

2.32

0.091

φ 3.50

0.138

Agilent Technologies provides an

IGES file drawing describing the

base plate molding features for

lens and PCB alignment

These components interlock as

they are mounted onto defined

features on the base plate.

The ADNS-2030 sensor is

designed for mounting on a

through hole PCB, looking down.

There is an aperture stop and

features on the package that

align to the lens.

12.60

0.496

11.38

0.448

0 ref

1.28

0.050

CLEAR ZONE

0 ref

φ 0.8

0.031

Recommended

(16 places)

40.53

1.596

1.22 5.10

0.048 0.201

7.50

0.295

13.88

0.546

MM

ALL DIMENSIONS

INCH

Figure 3. Recommended PCB mechanical cutouts and spacing (top view).

44.29

1.744

(Top view)

+X

The HDNS-2100 lens provides

optics for the imaging of the

surface as well as illumination of

the surface at the optimum angle.

Features on the lens align it to

the sensor, base plate, and clip

with the LED. The lens also has a

large round flange to provide a

long creepage path for any ESD

events that occur at the opening

of the base plate.

The HDNS-2200 clip holds the

LED in relation to the lens. The

LED must be inserted into the

clip and the LED’s leads formed

prior to loading on the PCB. The

clip interlocks the sensor to the

lens, and through the lens to the

alignment features on the base

plate.

The HLMP-ED80-XXXXX LED is

recommended for illumination. If

used with the bin table, sufficient

illumination can be guaranteed.

+Y

19.10

0.752

Dimensions in mm/in.

(Side view)

PLASTIC SPRING

BASE PLATE

ESD LENS RING

CLIP

14.58

0.574

10.58

0.417

7.45

0.293

13.82

0.544

PCB

SENSOR

BASE PLATE ALIGNMENT POST

Figure 4. 2D assembly drawing of ADNS-2030 (top and side view).

HDNS-2200 (Clip)

HLMP-ED80-XXXXX (LED)

ADNS-2030 (Sensor)

Customer supplied PCB

HDNS-2100 (Lens)

Customer supplied base plate

with recommended alignment

features per IGES drawing

Figure 5. Exploded view drawing.

3

Share Link: