ACS108-6SA-AP Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Fabricante
ACS108-6SA-AP Datasheet PDF : 13 Pages
| |||
ACS108-6SA
Datasheet
0.8 A - 600 V overvoltage protected AC switch (ACS™)
TO-92
G COM
OUT
OUT
G
COM
OUT
G
COM
Common drive reference to connect
to the mains
Output to connect to the load.
Gate input to connect to the controller
through gate resistor
Product status link
ACS108-6SA
Product summary
IT(RMS)
0.8 A
VDRM, VRRM
600 V
IGT
10 mA
Features
• Enables equipment to meet IEC 61000-4-5 surge with overvoltage crowbar
technology
• High noise immunity against static dV/dt and IEC 61000-4-4 burst
• Needs no external protection snubber or varistor
• Reduces component count by up to 80% and Interfaces directly with the micro-
controller
• Common package tab connection supports connection of several alternating
current switches on the same cooling pad
• VCL gives headroom before clamping then crowbar action
Applications
• Alternating current on/off static switching in appliances and industrial control
systems
• Driving low power high inductive or resistive loads like:
– relay, valve, solenoid, dispenser
– pump, fan, low power motor, door lock, air flow dumper
– lamp
Description
The ACS108-6SA belongs to the AC switch range (built with A. S. D.® technology).
This high performance switch can control a load of up to 0.8 A.
This device switch includes an overvoltage crowbar structure to absorb the inductive
turn-off energy, and a gate level shifter driver to separate the digital controller from
the main switch. It is triggered with a negative gate current flowing out of the gate pin.
Note:
®: A.S.D. is a registered trademark of STMicroelectronics
Note:
TM: ACS is a trademark of STMicroelectronics
DS1641 - Rev 6 - February 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
Share Link: 