AK6416AM Ver la hoja de datos (PDF) - Asahi Kasei Microdevices
Número de pieza
componentes Descripción
Fabricante
AK6416AM Datasheet PDF : 12 Pages
| |||
ASAHI KASEI
[AK6416A]
Read
The read instruction is the only instruction which outputs serial data on the DO pin. When the 17th falling
edge of SK is received , the DO pin will come out of high impedance state and shift out the data from D15 first
in descending order which is located at the address specified in the instruction.
The data in the next address can be read sequentially by continuing to provide clock. The address
automatically cycles to the next higher address after the 16bit data shifted out. When the highest address is
reached ($3FF), the address counter rolls over to address $000 allowing the read cycle to be continued
indefinitely.
READ
WREN / WRDS ( Write Enable and Write Disable )
When Vcc is applied to the part, it powers up in the programming disable (WRDS) state. Programming must
be preceded by a programming enable (WREN) instruction. Programming remains enabled until a
programming disable (WRDS) instruction is executed or Vcc is removed from the part. The programming
disable instruction is provided to protect against accidental data disturb. Execution of a read instruction is not
affected by both WREN and WRDS instructions.
WREN/WRDS
DAS02E-00
-6-
1999/05
Share Link: 