SP8916 Ver la hoja de datos (PDF) - Zarlink Semiconductor Inc
Número de pieza
componentes Descripción
Fabricante
SP8916 Datasheet PDF : 7 Pages
| |||
SP8916 (MP)
5GHZ ÷ 16 Fixed Modulus Divider
Preliminary Information
The SP8916 is one of a range of very high speed low
power prescalers for professional applications. The
dividing elements are static D type flip flops and therefore
allow operation down to DC if the drive signal is a pulse
waveform with fast risetime. The output stage has
internal100 ohm pull up resistors, giving a 0·5V p-p output.
If required, an external 100 ohm can be connected in
parallel to give a 50 ohm output.
Features
• Very High Operating Speed
• Operation down to DC with Square Wave Input
• Silicon Technology for Low Phase Noise
(Typically better than 2140dBc/Hz at 1KHz)
• 5V Single Supply Operation
• Low Power Dissipation: 340mW (Typ.)
• Surface Mount Plastic Package
DS4361
ISSUE 1.2
September 1999
Ordering Information
SP8916/KG/MP1S (tubes)
SP8916/KG/MP1T (tape and reel)
Absolute Maximum Ratings
Supply voltage, VCC
Storage temperature
6·5V
265°C to 1150°C
Maximum junction temperature
1150°C
Prescaler input voltage
2·5Vp-p
Operating temperature
KG240°C to 185°C TCASE
VREF
400 400
INPUT 2
INPUT 3
OUTPUT
VCC VCC
1
8
100 100
7 OUTPUT
416
6 OUTPUT
5mA
44
GND
Figure 1 - Block Diagram
Share Link: 