RC28F128P30BF65A Ver la hoja de datos (PDF) - Numonyx -> Micron

Número de pieza

componentes Descripción

Fabricante

RC28F128P30BF65A

Numonyx™ StrataFlash® Embedded Memory (P30)

Numonyx -> Micron 

P30

Revision History

Revision Date

April 2005

August 2005

September 2005

November 2005

February 2006

April 2006

May 2006

May-2006

June - 2007

November 2007

November 2007

Revision

-001

-002

-003

-004

-005

-006

-007

-008

-009

-010

11

Description

Initial Release

Revised discrete memory maps in Section 4.4, “Memory Maps” on page 22

Added memory maps for 512-Mbit top parameter devices in Section 4.4, “Memory

Maps” on page 22

Fixed size of Programming Region for 256-Mbit to be 8-Mbit in Section 4.4, “Memory

Maps” on page 22 and Section 11.0, “Programming Operations” on page 56

Removed power supply sequencing requirement in Section 8.1, “Power-Up and Power-

Down” on page 41

Updated conditions for Table 15, “Capacitance” on page 29

Updated CFI table in Appendix C, “Common Flash Interface”

Added note to Table 34, “Device ID codes” on page 71 for stacked Device ID codes

Synchronous burst read operation is currently not supported for the TSOP package

Updated 512-Mbit Easy BGA Ball Height (symbol A1) in Figure 2, “Easy BGA Mechanical

Specifications” on page 11

Updated read access speed for 265M TSOP package

Removed all references to 1 Gigabit.

• Added 52 MHz capabilities,

• Added TSOP Package information for 512 Mb throughout the document,

• Added Section 2.1, “Virtual Chip Enable Description” on page 8,

• Modified figures in Section 4.3, “Dual-Die Configurations” on page 21,

• Modified Table 9, “512-Mbit Top and Bottom Parameter Memory Map (Easy BGA and

QUAD+ SCSP)” on page 23,

• Modified Notes 5 & 6 to Reset Specifications table in Section 8.2, “Reset

Specifications” on page 41,

• Added additional note on 512 Mb capability in Table 31, “Selectable OTP Block

Mapping” on page 66.

• Updated the following tables to 52 MHz: Table 16, “AC Read Specifications for 64/

128- Mbit Densities” on page 29 and Table 17, “AC Read Specifications for 256/512-Mbit

Densities” on page 30.

• Added notes 1, 2, and 3 to Table 15, “Capacitance” on page 29.

• Correct typos and add clarifications

• Enabled specific burst operation on TSOP packages.

• Updated device commands table.

• Updaed description on synchronous burst operation.

• Added EOWL description.

• Updated flowcharts

• Updated for 65nm lithography

• Added W602 - Erase to Suspend

• Applied Numonyx branding.

November 2007

Order Number: 306666-11

Datasheet

5

Share Link: