Typical Performance Characteristics (Continued)
Figure 23. Current Lim it Response Tim e
(Output is Loaded by 2.2 , COUT=10 µF)
Figure 24. Short-Circuit Detection Function(2)
Figure 25. tBLANK vs. Response (3)
Figure 26. tRESTART vs. Response (3)
Note s :
2. When the output voltage is below V SCTH=1.1 V, the current limit value is set at 62.5% of the current limit value.
3. VDRV signal f orces the device to go into over-current condition by loading.
www.onsemi.com
9