LB1630M Ver la hoja de datos (PDF) - SANYO -> Panasonic

Número de pieza

componentes Descripción

Fabricante

LB1630M

Low-Saturation Bidirectional Motor Driver for Low-Voltage Applications

SANYO -> Panasonic 

Ordering number:EN2615A

Monolithic Digital IC

LB1630M

Low-Saturation Bidirectional Motor Driver

for Low-Voltage Applications

Overview

The LB1630M is a low-saturation bidirectional motor

driver IC for use in low-voltage applications. It is espe-

cially suited for use in small-sized low-voltage motors

for printers, cassette tape recorders, and commercial

equipment.

Features

• Low-voltage (2.5V min) operation, low current drain

(ICC≤30µA) at the standby mode.

• Low-saturation voltage (upper transistor + lower

transistor residual voltage 1.2V max at 400mA).

• On-chip spark killer diodes.

Package Dimensions

unit:mm

3036B-MFP20

[LB1630M]

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Parameter

Symbol

Conditions

Maximum supply voltage

Output supply voltage

Input supply votage

Allowable load resistance

GND pin flow-out current

Allowable power dissipation

VCC max

VOUT

VIN

RM min

IGND

Pd max

Pulse width<50ms, duty 10%

Pulse width<50ms, duty 10%

Operating temperature

Topr

Storage temperature

Tstg

Allowable Operating Conditions at Ta = 25˚C

Parameter

Supply voltage

Input high-level voltage

Input low-level voltage

Symbol

VCC

VIH

VIL

Conditions

SANYO : MFP20

Ratings

Unit

–0.3 to +7.0 V

–0.3 to VCC+VF V

–0.3 to +7.0 V

3Ω

1A

400 mW

–20 to +75 ˚C

–40 to +125 ˚C

Ratings

Unit

2.5 to 6.0 V

2.0 to 6.0 V

–0.3 to +0.7 V

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

82098HA (KT)/20295HK/7107TA, TS No.2615-1/3

Share Link: