DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

74LVT2952 Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza
componentes Descripción
Fabricante
74LVT2952
NXP
NXP Semiconductors. NXP
74LVT2952 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
NXP Semiconductors
74LVT2952
3.3 V Octal registered transceiver; 3-State
7. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).[1][2]
Symbol Parameter
Conditions
Min
Max
Unit
VCC
supply voltage
0.5
+4.6
V
VI
input voltage
[3] 0.5
7.0
V
VO
output voltage
output in OFF or HIGH state
[3] 0.5
+7
V
IIK
input clamping current
VI < 0 V
50
-
mA
IOK
output clamping current
VO < 0 V
50
-
mA
IO
output current
output in LOW state
output in HIGH state
-
128
mA
64
-
mA
Tstg
storage temperature
Tj
junction temperature
Ptot
total power dissipation
Tamb = 40 C to +85 C
65
+150
C
-
+150
C
[4]
-
500
mW
[1] Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
[2] The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 C.
[3] The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
[4] For SO20 packages: above 70 C derate linearly with 8 mW/K.
For SSOP20 and TSSOP20 packages: above 60 C derate linearly with 5.5 mW/K.
8. Recommended operating conditions
Table 6. Recommended operating conditions
Symbol Parameter
Conditions
Min
Max
Unit
VCC
supply voltage
2.7
3.6
V
VI
input voltage
0
5.5
V
IOH
HIGH-level output current
-
32
mA
IOL
LOW-level output current
-
32
mA
current duty cycle 50 %; fi 1 kHz
-
64
mA
Tamb
ambient temperature
in free air
40
+85
C
t/V input transition rise and fall rate output enabled
-
10
ns/V
74LVT2952
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 11 September 2013
© NXP B.V. 2013. All rights reserved.
5 of 17

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]