5962-00502 Ver la hoja de datos (PDF) - Aeroflex Corporation

Número de pieza

componentes Descripción

Fabricante

5962-00502

64-Channel Analog Multiplexer Module Radiation Hardened & ESD Protected

Aeroflex Corporation 

DC Electrical Performance Characteristics 1/ (con’t)

(Tc = -55°C to +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V, Unless otherwise specified)

Parameter

Symbol

Conditions

Min Max Units

Positive Input

Leakage Current

CH0-CH63

+ISOFFOUTPUT(ALL) VIN = +10V, VEN = 4V, output and all unused

+ISOFFCURRENT(ALL) MUX inputs under test = -10V 2/, 3/

-100 +700 nA

-100 +700 nA

Negative Input

Leakage Current

CH0-CH63

-ISOFFOUTPUT(ALL) VIN = -10V, VEN = 4V, output and all unused

-ISOFFCURRENT(ALL) MUX inputs under test = +10V 2/, 3/

-100 +700 nA

-100 +700 nA

Output Leakage

Current OUTPUTS

(pins 3,13, 23 & 33)

CURRENTS

(pins 67 & 69)

+IDOFFOUTPUT(ALL) VOUT = +10V, VEN = 4V, output and all

+IDOFFCURRENT(ALL) unused MUX inputs under test = -10V 3/, 4/

-100 +100 nA

-100 +100 nA

Output Leakage

Current OUTPUTS

(pins 3,13, 23 & 33)

CURRENTS

(pins 67 & 69)

-IDOFFOUTPUT(ALL) VOUT = -10V, VEN = 4V, output and all unused

-IDOFFCURRENT(ALL) MUX inputs under test = +10V 3/, 4/

-100 +100 nA

-100 +100 nA

Input Clamped

Voltage CH0 - CH63

+VCLMP(0-63)

VEN = 4V, all unused MUX inputs under test +25°C 18.0 23.0 V

are open. 3/

+125°C 18.0 23.5 V

-55°C 17.5 22.5 V

Input Clamped

Voltage CH0 - CH63

-VCLMP(0-63)

+25°C -23.0 -18.0 V

+125°C -23.5 -18.0 V

-55°C -22.5 -17.5 V

Switch ON

Resistance

OUTPUTS

(pins 25, 26, 68 & 70)

RDS(ON)(0-63)A

RDS(ON)(0-63)B

VIN = +15V, VEN = 0.8V, IOUT = -1mA

2/, 3/, 5/

VIN = +5V, VEN = 0.8V, IOUT = -1mA

2/, 3/, 5/

500 3000 Ω

500 3000 Ω

RDS(ON)(0-63)C

VIN = -5V, VEN = 0.8V, IOUT = +1mA

2/, 3/, 5/

500 3000 Ω

Switch ON

Resistance

CURRENTS

(pins 67 & 69)

RDS(ON)(32-63)A

RDS(ON)(32-63)B

VIN = +15V, VEN = 0.8V, IOUT = -1mA

2/, 3/, 5/

VIN = +5V, VEN = 0.8V, IOUT = -1mA

2/, 3/, 5/

500 3000 Ω

500 3000 Ω

RDS(ON)(32-63)C

VIN = -5V, VEN = 0.8V, IOUT = +1mA

2/, 3/, 5/

500 3000 Ω

Notes:

1/ Measure inputs sequentially. Ground all unused inputs of the MUX under test. VA is the applied input voltage to the MUXes’ address lines A(0-3).

VB is the applied input voltage to the MUXes’ address lines B(0-3).

2/ VIN is the applied input voltage to the MUXes’ input channel CH0-CH63.

3/ VEN is the applied input voltage to the MUXes’ enable line En(0-15), En(16-31), En(32-47) and En(48-63).

4/ VOUT is the applied input voltage to the MUXes’ output line OUTPUT(1-15), OUTPUT(16-31), OUTPUT(32-47), OUTPUT(48-63),

CURRENT(32-47) and CURRENT(48-63).

5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.

6/ If not tested, shall be guaranteed to the specified limits.

Switching Characteristics

(Tc = -55°C to +125°C, VDD = +15V, VEE = -15V, VR = +5.0V, Unless otherwise specified)

Parameter

Switching Test MUX

Symbol

tONA

tOFFA

tONEN

tOFFEN

Conditions

RL = 10KΩ, CL = 50pF

RL = 1KΩ, CL = 50pF

Min Max

10 1500

10 2000

10 1500

10 1000

Units

ns

ns

ns

ns

Aeroflex Circuit Technology

5

SCD8500 REV C 10/10/01 Plainview NY (516) 694-6700

Share Link: