5962-0050201HXC Ver la hoja de datos (PDF) - Aeroflex Corporation

Número de pieza

componentes Descripción

Fabricante

5962-0050201HXC

64-Channel Analog Multiplexer Module Radiation Hardened & ESD Protected

Aeroflex Corporation 

Organization and Application

The ACT8500 consists of six 16 channel muxes arranged as shown in the Block Diagram. The

ACT8501 design is inherently Radiation Hard due to the HS1840RH Multiplexers as well as

Microsemi Corp. Transient Suppressors (Reference Microsemi MicroNotes Series 050 - page

14).

A Section

32 channels addressable by Bus A0~A3, in two 16 channel blocks, each block enabled

separately. Each block connects the addressed channel to two outputs, "Output" and "Current".

This technique enables selecting and reading a remote resistive sensor without the MUX

resistance being part of the measurement. For grounded sensors, this is done by passing

current to the sensor by means of the "Current" pin and reading the resultant voltage

(proportional to the sensor resistance) at the "Output" pin.

B Section

32 channels addressable by Bus B0~B3, in two 16 channel blocks, each block enabled

separately. Each block connects the addressed channel to one output.

By paralleling the channel inputs and enables, this section can be converted to act like one of

the 16 channel blocks of the A section.

NOTE: It is recommended that all "NC or "no connect pin", be grounded. This eliminates or

minimizes any ESD or static buildup.

Aeroflex Circuit Technology

3

SCD8500 REV C 10/10/01 Plainview NY (516) 694-6700

Share Link: