SPT9693 Ver la hoja de datos (PDF) - Signal Processing Technologies
Número de pieza
componentes Descripción
Fabricante
SPT9693 Datasheet PDF : 10 Pages
| |||
ELECTRICAL SPECIFICATIONS
TA = +25 °C, AVCC = +10 V, AVEE = –10.0 V, RL = 50 Ohm to –2 V, unless otherwise specified.
PARAMETERS
TEST
CONDITIONS
TEST
LEVEL
MIN
AC ELECTRICAL PARAMETERS
Propagation Delay1
50 mV O.D., Slew 10 V/ns
Propagation Delay Tempco
Propagation Delay Skew (A vs B)
Delay Dispersion from
Input Direction
Delay Dispersion from
Input Common Mode
Latch Set-up Time
Latch to Output Delay
50 mV O.D.
Latch Pulse Width
Latch Hold Time
Rise Time
20% to 80%
Fall Time
20% to 80%
Slew Rate
1Valid for both high-to-low and low-to-high transitions
IV
.75
V
V
V
V
V
V
V
V
V
V
V
TYP
1.25
2
100
50
60
500
500
500
0
0.45
0.45
5
MAX
1.50
UNITS
ns
ps/ °C
ps
ps
ps
ps
ps
ps
ps
ns
ns
V/ns
TEST LEVEL CODES
All electrical characteristics are subject to the
following conditions:
All parameters having min/max specifications
are guaranteed. The Test Level column indi-
cates the specific device testing actually per-
formed during production and Quality Assur-
ance inspection. Any blank section in the data
column indicates that the specification is not
tested at the specified condition.
LEVEL
I
II
III
IV
V
VI
TEST PROCEDURE
100% production tested at the specified temperature.
100% production tested at TA = +25 °C, and sample tested at the
specified temperatures.
QA sample tested only at the specified temperatures.
Parameter is guaranteed (but not tested) by design and characteri-
zation data.
Parameter is a typical value for information purposes only.
100% production tested at TA = +25 °C. Parameter is guaranteed
over specified temperature range.
SPT
3
SPT9693
3/1/01
Share Link: 