RF2480 Ver la hoja de datos (PDF) - RF Micro Devices
Número de pieza
componentes Descripción
Fabricante
RF2480 Datasheet PDF : 8 Pages
| |||
RF2480
Pin Function Description
Interface Schematic
15
Q SIG
Baseband input to the Q mixer. This pin is DC-coupled. Maximum output
power is obtained when the input signal has a peak to peak amplitude of
Q SIG
Q REF
2V; for highly linear operation, the input signal (and output power) must be
100
100
reduced appropriately. The recommended DC level for this pin is 3.0V. The
peak minimum voltage on this pin (VREF - peak modulation amplitude)
should never drop below 2.0V. The peak maximum voltage on this pin
(VREF + peak modulation amplitude) should never exceed 4.0V. See pin 1
425
425
for more details.
16
I SIG
Baseband input to the I mixer. This pin is DC-coupled. Maximum output
power is obtained when the input signal has a peak to peak amplitude of
I SIG
I REF
2V; for highly linear operation, the input signal (and output power) must be
100
100
reduced appropriately. The recommended DC level for this pin is 3.0V. The
peak minimum voltage on this pin (VREF - peak modulation amplitude)
should never drop below 2.0V. The peak maximum voltage on this pin
(VREF + peak modulation amplitude) should never exceed 4.0V. See pin 1
425
425
for more details.
Package Drawing
0.157
0.150
-A-
0.008
0.004
0.393
0.386
0.018
0.014
0.050
8° MAX
0° MIN
0.244
0.229
0.034 0.009
0.016 0.007
0.068
0.053
NOTES:
1. Shaded lead is Pin 1.
2. All dimensions are excluding
mold flash.
3. Lead coplanarity - 0.005 with
respect to datum "A".
DS121024
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
5 of 8
Share Link: 