CXA1946AQ Ver la hoja de datos (PDF) - Sony Semiconductor
Número de pieza
componentes Descripción
Fabricante
CXA1946AQ Datasheet PDF : 24 Pages
| |||
CXA1946AQ/AR
Connections and Characteristics of Each Block
In the Application Circuit, the signal path goes from the input selector to the volume (+loudness) to the tone
control to the fader. The sequence of the blocks in the signal path can be changed because the I/O pins for
each block are independent of each other. For example, it is possible to switch the sequence of the volume
circuit and the tone control so that the signal path goes from the input selector to the tone control to the volume
(+loudness) to the fader. When this connection method is used, the noise voltage in the fader output can be
reduced in actual use because the noise and signal up to the tone control are attenuated by the volume.
However, because the maximum output amplitude of the tone control circuit is limited by the supply voltage,
care should be given to the setting of the input signal level.
Although blocks in the Application Circuit are linked either by coupling capacitors or by direct connection, it is
also possible to insert external circuits between blocks. In this case, the gain will change according to the input
impedance of the following block and the impedance of the external circuit. In addition, the input impedance of
each block can vary by ±20% due to the characteristics of the IC. Consequently, the overall gain also varies.
Give careful consideration to the effects of this variation when setting the constants. The step widths (control
characteristics) of the volume, tone control, and fader are not affected.
Timing Chart
CE
DATA
D1
D2
D30
D31
D32
Invalid
CLK
t1
tck
tsu th
t2
tL
t1 ≥ 0.5µs
t2 ≥ 0.5µs
tck ≥ 1.0µs
tsu ≥ 0.5µs
th ≥ 0.5µs
tL ≥ tT + 0.5µs
(tT is the maximum value for the timer operation time)
CE
tce
tce ≥ 4.0µs
Timer Waiting Period Setting Chart (Vcc = 6 to 12V, operating temperature = –35°C to 85°C)
TIMER pin
capacitance C
Waiting peroid
Min.
Typ.
Max.
C = 100pF
3µs
5µs
9µs
C = 0.001µF
30µs
50µs
90µs
C = 0.01µF
300µs
500µs
900µs
C = 0.1µF
3ms
5ms
9ms
C = 1µF
30ms
50ms
90ms
C = 10µF
300ms
500ms
900ms
– 22 –
Thi d t h t h b
df
ld
t h l t t th
Share Link: 