1688 Ver la hoja de datos (PDF) - Emcore Corporation

Número de pieza

componentes Descripción

Fabricante

1688

1688 1310 nm DFB Laser Module

Emcore Corporation 

1688 1310 nm DFB Laser Module

DATASHEET | FEBRUARY 2012

Ordering Information

1688-xx

Family Name

Analog 1310 nm, DFB, Laser

FIBER OPTICS

Optical Connector

06 = 6 mW

08 = 8 mW

10 = 10 mW

12 = 12 mW

14 = 14 mW

16 = 16 mW

20 = 20 mW

25 = 25 mW

28 = 28 mW

31 = 31 mW

Example:

1688-10, DFB 1310nm Laser, 10 mW, SC/APC Connector.

Laser Safety

This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1 laser

product. This device has been classified with the FDA/CDRH under accession number 0220191.

Single-mode fiber pigtail with SC/APC connectors (standard).

All Versions of this laser are Class 1 laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007

Wavelength = 1.3 m.

Maximum power = 50 mW.

Because of size constraints, laser safety labeling (including an FDA class 1 label) is not affixed to the module, but attached

to the outside of the shipping carton.

Product is not shipped with power supply.

Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous

laser radiation exposure.

DANGER

INVISIBLE LASER

AVOID DRIARDEICATTEIOXNPOSURE TO BEAM

Wavelength: 1.3 m

Max. Output: 50 mW,

Class 1 Laser Product

DANGER

INVISIBLE LASER RADIATION

IS EMITTED FROM THE END

OF FIBER OR CONNECTOR

Avoid direct exposure to beam

Do not view beam directly with

optical instruments

INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR

Avoid exposure to beam

Class 1 Laser Product IEC-60825-1:20007 Max. Output:50 mw

Wavelength: 1.3 m

| REV 2012.02

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Share Link: