TSOP22 Ver la hoja de datos (PDF) - Vishay Semiconductors
Número de pieza
componentes Descripción
Fabricante
TSOP22 Datasheet PDF : 7 Pages
| |||
www.vishay.com
TSOP22.., TSOP24.., TSOP48.., TSOP44..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1
2
3
16672
MECHNICAL DATA
Pinning for TSOP44.., TSOP48..:
1 = OUT, 2 = GND, 3 = VS
Pinning for TSOP22.., TSOP24..:
1 = OUT, 2 = VS, 3 = GND
FEATURES
• Improved immunity against HF and RF noise
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against optical noise
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series
are miniaturized IR receiver modules for infrared remote
control systems. A PIN diode and a preamplifier are
assembled on lead frame, the epoxy package contains an IR
filter.
The demodulated output signal can be directly connected to
a microprocessor for decoding.
The TSOP24.., TSOP44.. series devices are optimized to
suppress almost all spurious pulses from Wi-Fi and CFL
sources. They may suppress some data signals if
continuously transmitted.
The TSOP22.., TSOP48.. series devices are provided
primarily for compatibility with old AGC2 designs. New
designs should prefer the TSOP24.., TSOP44.. series
containing the newer AGC4.
These components have not been qualified according to
automotive specifications.
PARTS TABLE
AGC
LEGACY, FOR
LONG BURST REMOTE CONTROLS (AGC2)
RECOMMENDED FOR
LONG BURST CODES (AGC4)
30 kHz
TSOP4830
TSOP2230
TSOP4430
TSOP2430
33 kHz
TSOP4833
TSOP2233
TSOP4433
TSOP2433
Carrier
36 kHz
frequency 38 kHz
TSOP4836
TSOP4838
TSOP2236
TSOP2238
TSOP4436 (1)(2)(3)
TSOP4438 (4)(5)(6)
TSOP2436 (1)(2)(3)
TSOP2438 (4)(5)(6)
40 kHz
TSOP4840
TSOP2240
TSOP4440
TSOP2440
56 kHz
TSOP4856
TSOP2256
TSOP4456 (6)(7)
TSOP2456 (6)(7)
Package
Mold
Pinning
Dimensions (mm)
1 = OUT, 2 = GND, 3 = VS 1 = OUT, 2 = VS, 3 = GND 1 = OUT, 2 = GND, 3 = VS 1 = OUT, 2 = VS, 3 = GND
6.0 W x 6.95 H x 5.6 D
Mounting
Leaded
Application
Remote control
Best remote control code
(1) RC-5 (2) RC-6 (3) Panasonic (4) NEC (5) Sharp (6) r-step (7) Thomson RCA
Rev. 1.6, 22-Jul-16
1
Document Number: 82459
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 