ABS1110403(2009) Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
ABS1110403 Datasheet PDF : 11 Pages
| |||
ABS1,4,5
Au-clad double layer
Actuator
Operating force
Max. gf
Leaf lever
0.89 N
1.08 N
* Agency standard: Please refer to “Ordering information”.
Straight
ABS1638449
ABS1638549
SPST-NO
Wire position
Right angle
ABS4638449
ABS4638549
Left angle
ABS5638449
ABS5638549
SPECIFICATIONS
1. Contact rating
Voltage
AgNi alloy contact type
125 V AC
250 V AC
30 V DC
125 V DC
Resistive load
2A
2A
2A
0.4 A
Inductive load
2A
2A
2A
0.05 A
Low-level circuit rating (Au-clad contact type)
Rated voltage
6 V DC
12 V DC
24 V DC
Au-clad contact type
Au-clad
triple layer
Au-clad
twin layer
Resistive load
0.1 A
—
0.1 A
—
0.1 A
0.1 A
—
—
Resistive load
5 mA
2 mA
1 mA
Recommended contact material chart
classified by load voltage & current
(reference)
2A
100mA
Silver-alloy
Gold-clad triple layer
Gold-clad double layer
1mA
0
DC
5
15
AC
5
30V
30
250V
Remarks: If the contact is being used in the constant
low-level circuit load range, the Au-clad twin
layer contact is recommended. If there is a
danger of the current being less than 0.5 A,
for instance if the contact is being turned on
and off, the Au-clad triple layer type is
recommended.
2. Characteristics
Mechanical life
(O.T.: Specified value)
Leaf lever
Other types
Electrical life at rated load
(O.T.: Max.)
AgNi alloy contact type
Au-clad contact type
Insulation resistance
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
Contact resistance (Initial)
AgNi alloy contact type
Au-clad contact type
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
Unit weight
Min. 5x105 (at 60 cpm)
Min. 5x106 (at 60 cpm)
Min. 5x104 (at 20 cpm)
Min. 2x105 (at 20 cpm)
Min. 100 MΩ (at 500 V DC insulation resistance meter)
1,000 Vrms
1,500 Vrms
1,500 Vrms
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
Min. 294 m/s2 (Contact opening Max. 1 msec.)
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
0.1 to 500 mm/sec.
120 cpm
–40°C to +85°C
Approx. 2 g (IP50 type)
3. Operating characteristics
Type of actuator
Operating force, Max.
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Leaf lever
0.98N
0.39N
0.34N
0.25N
0.34N
0.39N
0.88N
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.08N
Release force, Min.
0.15N
0.034N
0.029N
0.025N
0.029N
0.034N
0.17N
0.20N
0.039N
0.034N
0.029N
0.034N
0.039N
0.20N
Pretravel, Max.
mm
0.6
2.5
2.8
3.5
2.8
2.5
4.5
Movement
differential,
Max. mm
0.1
0.5
0.8
1.0
0.8
0.5
1.0
Overtravel,
Min. mm
0.4
0.8
1.2
1.6
1.2
0.8
2.5
Operating
position,
mm
8.4±0.3
8.8±0.8
8.8±0.8
8.8±1.2
11.65±0.8
14.5±0.8
14.5±1.5
42
06/2009
Share Link: 