Audio ICs
FCircuit operation
(1) LINE and REC input circuits
The LINE and REC input circuits are configured as differ-
ential amplifiers, and the gain can be set to any desired
value using an external resistor. The input impedance is
determined by the external resistor.
BA3830S
(2) Bias circuit
A bias voltage of VCC / 2 is applied to each of the circuits.
Since the output stage uses a push-pull configuration, a
stable bias source can be obtained.
(3) BPF circuit
This is a circuit that selects the required frequency com-
ponent from the input signal and amplifies it. With this
configuration, no external capacitor is needed. In addi-
tion, the center frequency is set based on the current, so
f01 and f02 to f06 can be set individually, using separate ex-
ternal resistors (pins1 and 2).
Q is set to 4.5V (Typ.).
587