RT9199GSP Ver la hoja de datos (PDF) - Richtek Technology

Número de pieza

componentes Descripción

Fabricante

RT9199GSP

Cost-Effective, 2A Peak Sink/Source Bus Termination Regulator

Richtek Technology 

RT9199

Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for

stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the

operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended

periods may remain possibility to affect device reliability.

Note 2. Devices are ESD sensitive. Handling precaution recommended.

Note 3. The device is not guaranteed to function outside its operating conditions.

Note 4. θJA is measured in the natural convection at TA = 25°C on a high effective thermal conductivity test board (4 Layers,

2S2P) of JEDEC 51-7 thermal measurement standard. The case point of θJC is on the exposed pad for SOP-8

(Exposed Pad) package.

Note 5. VOS offset is the voltage measurement defined as VOUT subtracted from VREFEN.

Note 6. Regulation is measured at constant junction temperature by using a 5ms current pulse. Devices are tested for load

regulation in the load range from 0A to 2A peak.

Note 7. Standby current is the input current drawn by a regulator when the output voltage is disabled by a shutdown signal on

REFEN pin (VIL < 0.15V). It is measured with VIN = VCNTL = 5V.

www.richtek.com

6

DS9199-07 September 2007

Share Link: