FX602 Ver la hoja de datos (PDF) - CML Microcircuits

Número de pieza

componentes Descripción

Fabricante

FX602

Calling line identifier

CML Microcircuits 

Calling Line Identifier

FX602

The Input Signal Amplifier may also be used with an unbalanced signal source as shown in Figure 3b. The

values of R6 and R8 are as for the balanced input case.

Figure 3b : Input Signal Amplifier, unbalanced input configuration

1000

900

800

700

R8

600

500

400

300

R9

200

100

0

3

3.5

4

4.5

5

5.5

Nominal VDD

Figure 3c : Input Signal Amplifier, optimum values of R8 and R9 vs VDD

1.5.3 Bandpass Filter

Is used to attenuate out of band noise and interfering signals which might otherwise reach the FSK

Demodulator, Tone Alert Detector and Level Detector circuits. The characteristics of this filter differ in FSK and

Tone Alert modes. Most of the filtering is provided by Switched Capacitor stages clocked at 57.7kHz.

1.5.4 Level Detector

This block operates by measuring the level of the signal at the output of the Bandpass Filter, and comparing it

against a threshold which depends on whether FSK Receive or Tone Alert Detect mode has been selected.

In Tone Alert Detect mode the output of the Level Detector block provides an input to the Tone Alert Signal

Detector.

© 1998 Consumer Microcircuits Limited

8

D/602/7

Share Link: